您的位置: 标准下载 » 国际标准 » ISO 国际标准 »

ISO 10228-2011 越野雪橇.捆绑安装区.试验螺钉的要求

时间:2024-05-19 18:58:37 来源: 标准资料网 作者:标准资料网 阅读:8922
下载地址: 点击此处下载
【英文标准名称】:Cross-countryskis-Bindingmountingarea-Requirementsfortestscrews
【原文标准名称】:越野雪橇.捆绑安装区.试验螺钉的要求
【标准号】:ISO10228-2011
【标准状态】:现行
【国别】:国际
【发布日期】:2011-05-15
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC83
【标准类型】:()
【标准水平】:()
【中文主题词】:组装;捆绑带;越野滑雪板;定义(术语);尺寸规格;紧固件;固定件;体育与娱乐设备;锁定装置及定位装置;材料;安装位置;螺钉(螺栓);滑雪板装配;滑雪板;规范(验收);运动器材;试验螺栓;试验设备;试验;冬季运动设备
【英文主题词】:Assembling;Bindings;Crosscountryskis;Definitions;Dimensions;Fasteners;Fixings;Leisureequipment;Lockingandlocatingdevices;Materials;Mountingareas;Screws(bolts);Skibindings;Skis;Specification(approval);Sportsequipment;Testbolts;Testequipment;Testing;Wintersportsequipment
【摘要】:ThisInternationalStandardspecifiesthedimensions,mechanicalpropertiesandfasteningcharacteristicsoftestscrewsusedfortestingthebindingmountingareaofcross-countryskis.
【中国标准分类号】:Y55
【国际标准分类号】:97_220_20
【页数】:10P.;A4
【正文语种】:英语


【英文标准名称】:Specificationforaircraftmaterial-12percentchromiumcorrosion-resistingsteel(35/45tonf/sqin:limitingrulingsection6in)
【原文标准名称】:飞机材料规范.含12%铬耐蚀钢(35/45吨力/平方英寸:限定等圆断面6英寸)
【标准号】:BS3S61-1964
【标准状态】:作废
【国别】:英国
【发布日期】:1964-01-31
【实施或试行日期】:1964-01-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:热处理;铬钢;不锈钢;抗拉强度;硬度;名称与符号;材料的机械性能;化学成分;航空运输工程;棒材;坯锭;锻件;耐腐蚀钢;钢
【英文主题词】:Airtransportengineering;Bars(materials);Billets;Chemicalcomposition;Chromiumsteels;Corrosion-resistantsteels;Designations;Forgings;Hardness;Heattreatment;Mechanicalpropertiesofmaterials;Stainlesssteels;Steels;Tensilestrength
【摘要】:12PERCENTCHROMIUMCORROSION-RESISTINGSTEEL1.Inspectionandtestingprocedure.2.Processofmanufacture.3.Chemicalcomposition.4.Surfacedressing.5.Condition.6.Finalheattreatment.7.Mechanicalproperties.
【中国标准分类号】:V11
【国际标准分类号】:49_025_10
【页数】:8P.;A4
【正文语种】:英语


MIL-HDBK-61, MILITARY HANDBOOK CONFIGURATION MANAGEMENT GUIDANCE (30 SEP 1997)., This military handbook provides guidance and information to DoD acquisition managers, logistics managers, and other individuals assigned responsibility for Configuration Management. Its purpose is to assist them in planning for and implementing effective DoD configuration management activities and practices during all life cycle phases of defense systems and configuration items. It supports acquisition based on performance specifications, and the use of industry standards and methods to the greatest practicable extent. MIL-STD-973, which previously governed DoD configuration management procedures, is being phased out. This handbook is closely related to MIL-STD-2549, ”Configuration Management Data Interface,” the Electronic Industries Association (EIA) Standard 649, “National Consensus Standard for Configuration Management,” and EIA Standard 632, “Processes for Engineering a System.”